GE 3P W 8000 D
February 11, 2023
HPW- 350 Diesel
February 11, 2023
HPW- 350 Diesel – AC
- Extreme Diesel Portable Welding Machine Cum Generator, Suitable for High Quality & All types of Welding, Including Structural Welding Rods 7018 Size 5 mm Electrode & hard facing Rods.
- Most suitable for Big Diameter Pipe Line welding, Railway jobs
Description
| D C WELDING | MODEL | HPW – 350 Diesel – AC | |
| Special Highlights & Applications | · Extreme Diesel Portable Welding Machine Cum Generator, Suitable for High Quality & All types of Welding, Including Structural Welding Rods 7018 Size 5 mm Electrode & hard facing Rods.
· Most suitable for Big Diameter Pipe Line welding, Railway jobs |
||
| Maximum Output (Duty Cycle 60%) | 325 Amps. | ||
| Maximum Output (Duty Cycle 100%) | 275 Amps. | ||
| Working Voltage | 20v to 39 v | ||
| Open Circuit Voltage | 80 Volt (Minimum) | ||
| Current Regulation Amps | *60-325 | ||
| Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge Twin SCR Block |
||
| Electrode diameter | 3 mm to 6.0 mm | ||
| Alternator Type | Multiphase, Brush less with Rear Earth Magnet Rotor | ||
| A C GENERATOR | Maximum Ac Output | 5000VA | |
| Rated Output Current | 17.4 Amps. | ||
| NFB Amps | 18Amps. | ||
| AC. Voltageat No Load | 240Volts±10 Volts,SinglePhase | ||
| AC. Voltageat Rated Load | 220Volts±10 Volts,SinglePhase | ||
| Frequency (Adjustable) | 50to60Hz. | ||
| Alternator Type | Brushless, Rare Earth Magnetic Rotor,
THD ≤ 5 %, Pure Sine Wave. |
||
| Classof Insulation | F | ||
| ENGINE | Model | HM192F | |
| Type | 4-Stroke, OHV, Vertical, Single Cylinder, Direct Injection | ||
| Maximum Power | 14HP | ||
| Bore x Stroke | 92x72mm | ||
| Displacement | 499cc | ||
| Starting System | Recoil / Self Start | ||
| Fuel | Standard Diesel | ||
| Fuel Tank Capacity | 13 Liters | ||
| #Fuel Consumption Ltr./Hr. | 1.3 Ltr./hr. | ||
| Continuous Operating Hour | 10. hr. | ||
| Lube. Oil Capacity | 1650 ml. | ||
| Lubricating Oil Consumption | 4.3 gm./Hr. | ||
| Standard Accessories | AC Plug | 1 Pcs. | |
| Tool Kit | 1 Set | ||
| Welder Holder | 1 Set | ||
| Earthling Clamp with3 Mtr. Cable | 1 Set | ||
| Oil Funnel | 1 No. | ||
| Owner’s Manual | 1 No. | ||
| Battery Terminal | 1 Set | ||
| Battery Tray & Holding Set | 1 Set | ||
| *Optional Accessories |
Sheet Metal Welding Attachment (Helps to adjust low current up to 40 Amps.) |
1 Kit (Additional Cost) | |
| Panel & Other Standard Features |
A.C. Circuit Protector | Yes | |
| Engine Oil Protection | Electronic Oil Alert & Indicator | ||
| Low Fuel Protection | Yes | ||
| A.C. Pilot Lamp | Yes | ||
| Fuel Level Gauge | Yes | ||
| A.C. Output Sockets | 1 Nos. | ||
| Costar Wheels & Handle | Yes | ||
| Size &
Weight |
Dimensions (L x W x H mm) | 1005 x 510 x 715 mm | |
| Dry Weight (Kgs.) With Battery | 146 Kg | ||
| Battery Capacity | 12 Volt, 35Ah, Size : 190x120x225 (LxWxH) | ||
| Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation | |||
Reviews 0
Related products
-
GE 9000 – TIG 200 D (Combo Welder)
- Most suitable for Low Current, medium&
- High Current Welding of thin / thick Sheets, Arc Welding (MMA) on MS Sheets / Parts, Argon Welding (TIG) on SS Sheets / Parts
- World’s Most Powerful & Most LightWeight
- 8.5 KVA Portable Petrol Generator.
- Runs Two 1.5-ton Air Conditioners & Other Loads.
-
GE 3P W 8000 D
- Diesel Portable Arc Welder Cum Generator Machine Suitable for All types of General Purpose Structural Welding, Light, & Medium Welding Jobs, up to 4 mm Electrode
- In-built AC 230 volt – 50 Hz, 3 KVA – Single Phase.
- In Built AC 415 Volt – 50 Hz, 5 KVA- 3 Phase
- Can run all AC appliances including 3 Phase Motors.
-
GE- W 5500 R
- PortableArc Welder Cum Generator Machine Suitable for General Purpose Structural Welding, Light and medium Welding Jobs, up to 4 mm Electrode
- In-built AC 230 volt – 50 Hz, 3 KVA for AC Appliances
-
GE 9000 Plasma Cut 60 H (Combo Welder)
SELF POWERED PORTABLE AIR COMPRESSOR Model No. & Type HM 2550 B-156 P Engine Model & Power HM 156 P, 3 HP Speed (RPM) 2800 -3400 […]
Reviews
There are no reviews yet.