HPW 175 D – AC
February 11, 2023
DIGITAL – W 250 AC – TIG
February 11, 2023
HPW 250 D
World’s Most Portable, Professional & Low Cost Arc Welding Machine Suitable for High Class Welding Including Structural Welding Rods 7018 Size 4mmElectrode.
Description
| DC WELDING GENRATOR | Model | HPW 250 D |
| Special Highlights & Applications | World’s Most Portable, Professional & Low Cost Arc Welding Machine Suitable for High Class Welding Including Structural Welding Rods 7018 Size 4mmElectrode. | |
| Maximum Output (Duty Cycle 60%) | 225 Amps. | |
| Welding Output at 100 % duty Cycle | 175 Amps | |
| Working Voltage | 20v to 32v | |
| Open Circuit Voltage | 70 Volt (Maximum) | |
| Current Regulation Amps | *50-225 | |
| Rectifying Mode | SCR, Phase Controlled 3-phase, Rectifying Bridge | |
| Maximum Electrode diameter | 2.6 mm to 4.0 mm (E 7018) | |
| Alternator Type | Multiphase, Brush less with Rear Earth Magnet Rotor | |
| ENGINE | Model | HM170FB |
| Type | Single Cylinder Air-cooled; 4-stroke, OHV 25˚ Inclined | |
| Maximum Power | 7.5 HP | |
| Bore x Stroke | 70×58 | |
| Displacement | 223cc | |
| Starting System | Recoil Start | |
| Ignition System | TCI (Transistor Control Ignition) | |
| Fuel | Standard Petrol | |
| Fuel Tank Capacity | 12 Liters | |
| Fuel Consumption # Ltr./Hr. (at 60 % Duty Cycle) | 1.0Ltr./hr. | |
| Continuous Operating Hour | 12 hr. | |
| Lube. Oil Capacity | 600 ml. | |
| Lubricating Oil Consumption | 2.5 gm./Hr. | |
| Standard
Accessories |
Tool Kit | 1 Set |
| Welder Holder | 1 Set | |
| Earthing Clamp with 3Mtr. Cable | 1 Set | |
| Oil Funnel | 1 No. | |
| Owner’s Manual | 1 No. | |
| Panel & OtherFeatures |
Aux. AC Output 230 Volt – 50 Hz | Invertor 2.0 KVA – 230 Volt AC, 50 Hz (Optional) |
| Overload Protection (NFB) | Yes (Inverter) | |
| Power Indicator | No | |
| Ampere Meter | Yes | |
| Engine Oil Protection | Yes (Electronic Oil Alert & Indicator) | |
| Fuel Level Gauge | Yes | |
| Size &
Weight |
Dimension LxWxH (mm) | 600x450x530 mm |
| Dry Weight (Kgs.) | 50 Kgs. | |
| *For low welding current 50-75 Amps use “Sheet Metal Welding Attachment” (Optional at Extra Cost)
Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team. This specification’s can change without any prior intimation |
||
Reviews 0
Related products
-
GE 9000 – TIG 200 D (Combo Welder)
- Most suitable for Low Current, medium&
- High Current Welding of thin / thick Sheets, Arc Welding (MMA) on MS Sheets / Parts, Argon Welding (TIG) on SS Sheets / Parts
- World’s Most Powerful & Most LightWeight
- 8.5 KVA Portable Petrol Generator.
- Runs Two 1.5-ton Air Conditioners & Other Loads.
-
HPW- 350 Diesel – AC
- Extreme Diesel Portable Welding Machine Cum Generator, Suitable for High Quality & All types of Welding, Including Structural Welding Rods 7018 Size 5 mm Electrode & hard facing Rods.
- Most suitable for Big Diameter Pipe Line welding, Railway jobs
-
DIGITAL – W 250 AC – TIG
High current argon welder for Tig Welding of Stainless Steel Pipes and sheets with thickness of More than 3 mm
- World’s Most Portable, Professional & Low-Cost Arc Welding Machine Suitable for High-Class Welding Including Structural Welding Rods 7018 Size 4mm Electrode
- Inbuilt 2 KVA Inverter for 230 Volt, AC Output
- Inbuilt 200 Amps, TIG Welding for “SS Welding, SS Pipe Lines”.
-
GE- W 5500 R
- PortableArc Welder Cum Generator Machine Suitable for General Purpose Structural Welding, Light and medium Welding Jobs, up to 4 mm Electrode
- In-built AC 230 volt – 50 Hz, 3 KVA for AC Appliances
Reviews
There are no reviews yet.