Product Range

Special Highlights & Applications ·         World’s Most Portable, Professional & Low Cost Arc Welding Machine Suitable for High Class Welding Including Structural Welding Rods 7018 Size 4mm Electrode

·         Inbuilt 2 KVA Inverter for 230 Volt, AC Output

·         Inbuilt 200 Amps, TIG Welding for “SS Welding, SS Pipe Lines”.

Maximum Output (Duty Cycle 60%) 225 Amps.
Welding Output at 100 % duty Cycle 175 Amps
Working Voltage for Arc Welding 20v to 32v
Working Voltage for Tig Welding 15V – 20 V
Open Circuit Voltage 70 Volt (Maximum)
Current Regulation Amps *50-225
Rectifying Mode SCR, Phase Controlled 3-phase, Rectifying Bridge
Maximum Electrode diameter (MMA) 2.6 mm to 4.0 mm (E 7018)
AC GENERATOR Alternator Type Multiphase, Brush less with Rear Earth Magnet Rotor
Maximum Power (VA) 2000 VA
Rated Power (VA) 1800VA
Rated Current 7.5 Amps.
NFB Amps 7.5 Amps.
AC. Output Voltage 220 Volts ± 8%  Volts, Single Phase – 50 Hz
Class of Insulation F
Type Single Cylinder Air-cooled; 4-stroke, OHV 25˚ Inclined
Maximum Power 7.5 HP
Bore x Stroke 70×58
Displacement 223cc
Starting System Recoil Start
Ignition System TCI (Transistor Control Ignition)
Fuel Standard Petrol
Fuel Tank Capacity 15.5 Liters
Fuel Consumption # Ltr./Hr. 1.1 Ltr./hr.
Continuous Operating Hour 15 hr.
Lube. Oil Capacity 600 ml.
Lubricating Oil Consumption 2.5 gm./Hr.
Standard Accessories AC Plug 1Pcs.
Tool Kit 1 Set
Welder Holder 1 Set
Earthing Clamp with 3Mtr. Cable 1 Set
Oil Funnel 1 No.
Owner’s Manual 1 No.
Tig Torch with Cable 1 Set


Sheet Metal Welding Attachment
(Helps to adjust low current upto 50 Amps.)


1 Kit (Additional Cost)
Panel &
Other Standard Features
A.C. Circuit Protector (NFB) Yes
A C. Pilot Lamp Yes
Engine Oil Protection Yes (Electronic Oil Alert & Indicator)
Fuel Level Gauge Yes
A.C. Output Sockets Yes (1 Nos.)
Costar Wheels & Handles Yes
Size &


Dimension LxWxH (mm) 790 x 510 x 670 mm
Dry Weight (Kgs.) 82 Kg
Above Specifications are for reference only, Because of continuous improvements and up-gradation by our R&D team.  This specifications can change without any prior intimation



There are no reviews yet.

Be the first to review “DIGITAL – W 250 AC – TIG”

Your email address will not be published. Required fields are marked *